溫度影響點膠機膠水的粘稠度和速度，在硅膠點膠機的作業中是一個非常重要的參數，點膠膠水在不用的時分一般存儲在冰箱中，運用之前半小時左右拿出來。膠水在運用的時分溫度應該操控在24攝氏度左右；其他，環境的溫度也對膠水有很大的影響，據檢驗標明，環境溫度差5攝氏度的話，就會形成一半的點膠量改變，硅膠點膠機所以環境溫度的操控也是非常重要的。
Temperature affects the viscosity and speed of dispensing machine glue, in the operation of silicone dispensing machine is a very important parameter, dispensing glue is generally stored in the refrigerator when not in use, about half an hour before use out. The temperature of glue should be controlled at about 24 degrees Celsius when it is used. Otherwise, the temperature of the environment has a great influence on the glue. According to the test, if the temperature difference is 5 degrees Celsius, half of the amount of dispensing will be changed. So the temperature control of the environment is very important.
膠水的粘度關于電教質量的影響是非常大的，粘度過大，可能導致拉絲現象；多小的話，可能導致身染焊盤，所以選擇適合的濃度關于硅膠點膠機的作業是非常重要的。在硅膠點膠機的運用進程中會遇到各式各樣的問題，但是只需你提前做好準備，了解硅膠點膠機的功能和參數，就必定能夠處理的。
Viscosity of glue on the audio-visual quality of the impact is very large, viscosity is too large, may lead to wire drawing phenomenon; how small, may lead to body dyeing pad, so choose the appropriate concentration of silicone dispensing machine operation is very important. In the process of using silicone dispensing machine will encounter a variety of problems, but as long as you are prepared in advance, understand the functions and parameters of silicone dispensing machine, will be able to deal with.

1.談價格
1. talk about the price
在談價格時，有些雙組份打膠機收購者光知道要銷售者廉價一些，雖然也起到一些效果，但根本都是在銷售人員可控價格范圍內，雙組份打膠機收購者得想方法要特批價格，要到一個不愿意出售的價格成交，你就成功了，當然，這里面是有技巧的，就需要有良好的商洽技巧了，如是否包運輸之類的。
When discussing prices, some buyers of two-component dispensers only know that the seller is cheaper, although it has some effect, but it is basically within the price control of the sales staff. The buyer of two-component dispensers has to find a way to get a special price, to a price unwilling to sell, you have succeeded, of course. It is skillful and requires good negotiation skills, such as whether it is packaged or not.
2.看裝備
2. look at the equipment
這是在雙組份打膠機收購中難的部分，或許你自己并不明白，不要緊，不明白，你能夠聽，你隨意問一句裝備狀況，銷售人員就會給你說上一大堆，你記下一些要害的就行，再去其他廠家調查時，依樣畫葫蘆，你就懂了。
This is the most difficult part in the acquisition of the two-component glue beater, perhaps you do not understand, it does not matter, do not understand, you can listen to, you ask a question of equipment status, the sales staff will give you a lot of, you note down some of the key on the line, and then go to other manufacturers to investigate, draw the gourd, you will understand.