雙組份打膠機操作流程是怎么樣的
What is the operation procedure of the two component glue machine?
因雙組份打膠機是全氣動操控機型,為了運用戶更好地運用好該設備,故主張?jiān)谶\(yùn)用前有必要仔細閱讀本說明書并嚴峻遵照下列要求進行操作
Since the two-component glue beater is a fully pneumatic control machine, in order to make better use of the equipment, it is advisable to read this instruction carefully before using it and operate it strictly in accordance with the following requirements
1.接通氣源:本機預留氣管接口為PU12快插接頭。氣源接通,調度減壓閥至0.4~0.6Mpa,檢查體系有無漏氣現象。然后試運行以下動作:1.A泵前進;2.A泵充氣;3.B泵前進;4.B泵充氣。留心:前進氣缸前進時,假定兩氣缸不同步,請下降至原點后從頭操作。
1. connect the gas source: the air interface is reserved for PU12 quick connector. The gas supply is connected, and the pressure reducing valve is sent to 0.4~0.6Mpa to check whether the system has any air leakage. Then test run the following actions: 1.A pump forward; 2.A pump inflation; 3.B pump forward; 4.B pump inflation. Caution: when the forward cylinder is advancing, suppose the two cylinder is out of sync, please descend to the origin and operate from the beginning.
2.將A、B組份膠桶就位,并與A、B膠泵的軸線對中。以A組份為例:
2. place the A and B components of the plastic bucket in line with the axis of the A and B glue pumps. Take A component as an example:
1、操作手動轉閥,將A泵前進至高,前進過程中查詢各管路有無拉伸過緊處。
1. Operate the manual rotary valve, move the A pump to the highest level, and inquire whether the pipelines are stretched too tight during the progress.
2、將膠桶放置在。的雙組份打膠機錯,咱們這用了幾臺雙組份打膠機都是他家的,質量很好。
2, place the plastic bucket. The two component glue machine is wrong. We used several two component glue machines in our home. The quality is very good.

中空玻璃機需不需要雙組份打膠機
Do you need a two component glue machine for the hollow glass machine?
在中空玻璃機器的運用中,配套的打膠設備一貫存在爭議,現在出口國外的打膠設備悉數為 雙組份打膠機,而國內常常有廠家會推銷熱熔膠打膠機,雙組份涂膠機是出產中空、幕墻玻璃的專用設備,可一次完畢二道密封中A、B組份混合與涂膠。適用配比精度高的膠種,滿意玻璃深加工企業高、高合格率流水線作業的出產需求該機消化吸收美國技術,純氣動馬達。機架選用全體焊接,龍門架、焊接三角形構成安穩結構,打敗懸臂梁作業時的搖晃,B泵選用雙立柱,壓盤雙道密封,徹底處理黑組份膠易氧化走漏的難題;優化管路規劃,處理產品流速慢的問題。出產熱熔膠式。
In the use of hollow glass machines, the matching gluing equipment has always been controversial. Now all the gluing equipment exported abroad is a two-component gluing machine, and domestic manufacturers will often promote hot-melt gluing machine. The two-component gluing machine is a special equipment for producing hollow, curtain wall glass. It can complete the mixing of A and B components in two seals at one time. And gelatinized. It is suitable for the high precision glue, and satisfies the production requirement of high efficiency and high qualified production line in glass deep processing enterprises. The machine digests and absorbs American advanced technology and pure pneumatic motor. The frame adopts all welding, gantry frame and welding triangle to form a stable structure to defeat the shaking of the cantilever beam. The B pump adopts double columns and pressure plate with double seals to thoroughly deal with the problem of oxidation and leakage of black component glue. The pipeline planning is optimized to deal with the problem of slow product flow. Produce hot melt adhesive.
濟南昌盛機械,雙組份打膠機有需要朋友可以關注我們http://intelyalan.cn，敬請期待更多精彩內容。
Jinan Changsheng Machinery, two-component glue beater need friends can pay attention to our http://intelyalan.cn, please look forward to more exciting content.