ab膠點膠機，又稱雙液膠點膠機。是專門用來點雙組份膠水的設備，與普通點膠機設備相比較，同樣由氣壓控加膠水由料筒壓出，有閥門控制出膠大小。不同的就是有兩套控制系統(tǒng)，分別控制a膠和b膠。
　　AB glue dispenser, also called double liquid glue dispenser. It is a device specially used for ordering two components of glue. Compared with the general dispensing equipment, it is also pressed by pneumatic control and glue from the cylinder, and the size of the valve is controlled by the valve. The difference is that there are two sets of control systems, which control a glue and B glue respectively.
　　AB膠點膠機的使用分別調動手動點膠閥尾部調動螺絲，順時針向下轉動為減小膠量，逆時針方向轉動為加大膠量。
　　The use of AB glue machine manual dispensing valve respectively mobilize tail adjusting screw clockwise rotation, down to reduce the amount of glue, anti clockwise to increase the amount of glue.
　　通過調動壓力桶調壓閥來控制AB膠桶的壓力，從而控制膠水的出膠速率，加大壓力，出膠加速，反之，出膠減慢。通常為了到達AB膠出膠速率均衡，較黏稠流動性差的膠液必要較大壓力，流動性強的膠液只需較小壓力即可。

　　Through the mobilization of pressure tank pressure regulating valve to control the pressure barrel AB glue, so as to control the rate, increase the pressure of glue glue, glue on the other hand, acceleration, slow down. Usually in order to reach AB glue rate equilibrium, more viscous fluidity glue glue the necessary pressure, strong liquidity and a small pressure can.
　　在清理AB膠點膠機桶內的膠水換成清洗液(清水/天那水/酒精/丙酮)，高壓力將清洗液從點膠閥打出，可掃除槍內殘渣膠。
　　In the cleaning barrel AB glue machine glue into the cleaning liquid (water / ethanol / acetone / water that day), high pressure cleaning liquid from the dispensing valve type, can remove residue in the glue gun.
　　以上便是雙組份打膠機今天的分享，您還滿意嗎，歡迎關注我們的網站:http://intelyalan.cn并且關注我們的產品，我們將為您提供優(yōu)良的產品，衷心的愿與您建立合作關系。
　　The above is a two component glue machine today's sharing. Are you satisfied? Welcome to our website: http://intelyalan.cn and pay attention to our products. We will provide you with excellent products and sincerely cooperate with you.