熱熔膠涂布機可將固態的熱熔膠熔化，并通過加壓裝置將熔化后變?yōu)橐簯B(tài)的膠輸送到膠涂布裝置對基材實行涂布。集精確溫度控制功能﹑流體加壓輸送功能和擠出涂布功能于一體的機電設備。另具備自動控制及自動跟蹤生產線速度的功能。

The hot melt adhesive coating machine can melt solid hot melt adhesive and transport the melted liquid adhesive to the adhesive coating device through a pressure device for coating the substrate. A mechanical and electrical equipment that integrates precise temperature control function, fluid pressure conveying function, and extrusion coating function. It also has the function of automatic control and automatic tracking of production line speed.

主機:具備加熱保溫,熔化膠液,輸出膠液,控制膠液壓力,初級過濾等功能.主機溫度應控制在比膠液熔點溫度高5-10度.使之具有一定的流動性.使壓力控制更為準確.

Host: It has functions such as heating and insulation, melting glue liquid, outputting glue liquid, controlling glue liquid pressure, and primary filtration. The host temperature should be controlled 5-10 degrees higher than the melting point temperature of the glue liquid to provide a certain degree of fluidity and more accurate pressure control

喉管:具備加熱保溫,導流膠液的作用,將液態熱熔膠由主機輸出至槍座模塊的功能.溫度保持在稍高于膠液熔點溫度即可。

Throat: It has the functions of heating and insulation, guiding the adhesive liquid, and outputting the liquid hot melt adhesive from the host to the gun seat module. The temperature should be kept slightly higher than the melting point of the adhesive liquid.

槍座:具備加熱保溫,二級過濾.并將膠液輸送至槍體.并視需要,加熱壓縮空氣的功能.可視噴膠效果適當提高溫度。使膠液流動性更好。

Gun holder: equipped with heating and insulation, secondary filtration, and the ability to transport the glue solution to the gun body. It also has the function of heating compressed air as needed. The temperature can be appropriately increased based on the visible spraying effect. Improve the fluidity of the adhesive solution.

槍體:具備打開及關閉膠液的功能.并按需求配套各種噴嘴及刮嘴.以滿足用戶的需求.有螺旋噴槍，涂布刮槍，纖維噴槍，Z字型噴槍，點狀槍等等。

Gun body: It has the function of opening and closing the adhesive liquid. It is equipped with various nozzles and scrapers according to the needs to meet the needs of users. There are spiral spray guns, coating scraper guns, fiber spray guns, Z-shaped spray guns, dot guns, etc.

自動補償控制系統：具備輸出信號控制電磁閥，由電磁閥控制的壓縮空氣帶動槍體的工作來控制膠液的打開及關閉。并輸出0-10V 直流電壓控制變頻器帶動馬達轉動。輸出電壓與被被測生產線速度成正比。可在線調整膠位、斷膠長度及跟蹤電壓。檢測生產線速度的裝置有接近開關，旋轉編碼器等。

本文來自：臥式丁基膠涂布機更多的內容請點擊：http://intelyalan.cn我們將會為您提問的問題提供一個滿意的服務，歡迎您的來電！

Automatic compensation control system: equipped with output signal control solenoid valve, the compressed air controlled by the solenoid valve drives the operation of the gun body to control the opening and closing of the adhesive liquid. And output 0-10V DC voltage to control the frequency converter to drive the motor to rotate. The output voltage is directly proportional to the speed of the tested production line. The adhesive position, broken adhesive length, and tracking voltage can be adjusted online. The devices for detecting the speed of the production line include proximity switches, rotary encoders, etc. This article is from: Horizontal butyl rubber coating machine. For more content, please click: http://intelyalan.cn We will provide satisfactory service for the questions you ask. Welcome to call us!