打膠過程中膠體出現結皮或硫化現象，對打膠效果一項十分的巨大，在以后的使用中也很有很多令人頭痛的是發生！下面全自動封膠機廠家的小編就給大家總結一下打膠機膠體出現結皮或硫化現象的原因，希望小伙伴在以后的操作中多加注意，避免出現這種現象！
Colloid crust or vulcanization occurs in the gluing process, which has a great effect on the gluing, and there are many headaches in the future use. The following is a summary of the reasons for the crust or vulcanization of the glue in the glue beater by the small edition of the manufacturer of the automatic sealing machine. I hope that the small partners will pay more attention in the future operation to avoid this phenomenon.
當雙組份膠在混合過程中就發生局部固化時，膠槍打出來的膠就會出現結皮或硫化現象。出現這一現象的原因主要有三種：
When local curing occurs in the mixing process of two-component rubber, crust or vulcanization will occur in the rubber produced by rubber gun. There are three main reasons for this phenomenon:
⑴膠體顏色較黑，固化快時，可能是由于B組分比例過高，過多的催化劑促使固化速度加快。此時，需要適當降低B組分的比例，將結皮或硫化膠沖洗干凈后施工；
(1) When the colloid is black and solidified quickly, it may be due to the high proportion of B component, and the excessive catalyst promotes the speed of solidification. At this time, it is necessary to reduce the proportion of B component appropriately and rinse the crust or vulcanizate before construction.

⑵若打膠過程中伴有出膠慢的現象時，可能是混合芯長時間未清洗或清洗不徹底，膠體結皮堵塞管道。因此，定期清洗靜態混合器是很有必要的。
(2) If the gelling process is accompanied by slow gelling, it may be that the mixed core has not been cleaned for a long time or is not thoroughly cleaned, and the gel crust blockages the pipeline. Therefore, it is necessary to clean the static mixer regularly.
⑶當固化和出膠速度均無異常，而打出的膠仍有結皮或硫化現象時，則可能是設備停機時間較長，膠槍未清洗或洗槍不夠徹底，需要將結皮或硫化膠沖洗干凈后后施工。
(3) When there is no abnormal curing and tapping speed, and there is still crust or vulcanization in the tapped rubber, it may be that the equipment has been shut down for a long time, the rubber gun has not been cleaned or the gun has not been cleaned thoroughly enough, so it is necessary to rinse the crust or vulcanizate before construction.
以上的精彩內容由全自動封膠機整理提供，更多的精彩內容請繼續關注我們：http://intelyalan.cn，我們會有更多的精彩內容等你查看！
The above wonderful content is provided by automatic sealing machine. More wonderful content please continue to pay attention to us: http://intelyalan.cn, we will have more wonderful content waiting for you to see!