氣動控制技術是由空氣壓縮機的氣體壓縮是強大的壓力,使其有很高的壓力和動力了,在一個密封的使用膠水關注技術,不銹鋼主要用于約束和膠水點膠閥、氣動控制技術已經成為現在一點橡膠工業成為缺乏技術的重點之一。
　　Pneumatic control technology is made by the air compressor, which is a powerful pressure, so it has a high pressure and power. In a sealed use of glue attention technology, stainless steel is mainly used for constraint and glue dispensing valve, pneumatic control technology has become one of the key points in the rubber industry which is lack of technology.
　　電動與氣動價格差距
　　Price gap between electric and pneumatic
　　密封在傳感器中的應用點膠水,膠水用于不銹鋼點膠閥配件,所以如何使點膠閥與雙動可以實現回吸,與氣動控制技術,當然,有些人想知道為什么不使用電動產品,也有電點膠閥,氣動點膠閥無非是價格的兩倍或三倍,甚至更高,收益率不劃算的使用在工業上,只有采用氣壓控制技術，才能使氣動調劑閥與電動調劑閥相媲美。
　　The application point glue of sealing in sensor, glue is used for stainless steel point glue valve accessories, so how to make the point glue valve and double acting can realize the suction, and pneumatic control technology, of course, some people want to know why not use electric products, but also have electric point glue valve, pneumatic point glue valve is no more than twice or three times of the price, or even higher, the rate of return is not cost-effective in industry, only using pneumatic control Only by using this technology can the pneumatic regulating valve be compared with the electric regulating valve.
　　a - y6調劑控制器
　　A - y6 regulating controller
　　分配閥實現吸、再作用和空氣壓力
　　Distribution valve to achieve suction, reaction and air pressure
　　不銹鋼點膠閥與雙動可以實現回吸,與氣彈簧有直接的關系,氣彈簧可以實現按照范圍伸展和收縮的壓力,適度的壓力直接侵入改變彈簧秤,這樣我們可以使不銹鋼粘回吸入閥和雙動,這時每個泰國密封膠機城市空氣壓力控制裝置,可防止密封不好,也可以回吸和雙代，一舉兩得。
　　The stainless steel dispensing valve and double acting can realize the suction, which has a direct relationship with the air spring. The air spring can realize the pressure of expansion and contraction according to the range, and the moderate pressure directly invades and changes the spring scale, so that we can make the stainless steel stick back to the suction valve and double acting. At this time, the air pressure control device of each Thai sealant machine can prevent the bad sealing, and can also recycle and double acting. Two gains.

　　氣動控制裝置類型
　　Type of pneumatic control device
　　遵循一個取之不盡的提升點膠機生產技術、氣動控制技術逐漸成熟,孤獨的壓力控制設備生產新太,像一個982點膠控制裝置,控制裝置983年和800年的控制裝置,裝置916蠕變約束等,基礎工業生產用于約束設備,氣動控制技術是一項成熟的技術,密封的環境也逐漸減少。
　　Following an inexhaustible improvement of dispensing machine production technology and pneumatic control technology, the lonely pressure control equipment production Xintai, like a 982 dispensing control device, the control device of 983 and 800 years, device 916 creep restraint, etc., the basic industrial production is used for restraint equipment, pneumatic control technology is a mature technology, and the sealed environment is gradually reduced.
　　日常維護，確保設備的正常運行
　　Daily maintenance to ensure the normal operation of the equipment
　　只有在密封的使用點膠機根據仿表操作的使用,每日不銹鋼閥門維修和測試密封,測試氣彈簧可伸縮性、等,生產基地將不存在問題,空氣壓力控制技術相對成熟,很少會出現空氣壓力造成的分配不能提交。
　　Only in the use of sealing dispenser according to the use of table imitating operation, daily maintenance and test of stainless steel valve sealing, test of gas spring scalability, etc., there will be no problems in the production base, the air pressure control technology is relatively mature, and rarely the distribution caused by air pressure can not be submitted.
　　如果您還想了解更多關于雙組份打膠機的信息可關注我們的網站http://intelyalan.cn，也可直接與我們聯系，我們會為您提供更貼心的服務。
　　If you want to know more about the two-component dispenser, you can follow our website http://intelyalan.cn or contact us directly. We will provide you with the most intimate service.