中空玻璃雙份打膠機出現打膠不飽滿這個問題主要是有以下兩種情況導致的！

Insulating glass double tape sealer appears not full of glue this problem is mainly due to the following two cases!
一、打膠速度過快

1. Glue too fast
有些客戶為自己的生產節奏追趕生產進度，把打膠速度認為調整得太快，導致膠體還沒有完全達到合格標準機頭已經移到了下一步。

Some customers for their own production rhythm to catch up with the production schedule, the glue speed is considered too fast, resulting in Gel has not yet fully up to the standard head has moved to the next step.
做打膠作業的位置，如果需要快速打膠的速度調節打膠機的移動參數，那么相應的膠料系統也要相應的設置，比如此一來，我們需要增加給膠壓力，雙組份打膠機的出膠速度與物體移動的速度相配合。假如我們只是單獨提高打膠機的移動速度如果沒有對壓力進行適當?shù)恼{(diào)節，就很容易出現打膠不飽滿的情況。

For the location of the gluing operation, if the speed of quick gluing is needed to adjust the movement parameters of the gluing machine, then the corresponding gluing system should also be set accordingly. For example, in this way, we need to increase the pressure on the gluing machine, the gluing speed of the gluing machine is matched with the speed of the moving object. If we only increase the movement speed of the sealer alone if there is no proper adjustment to the pressure, it is easy to appear the situation of insufficient gluing.

二、供膠壓力不足
Insufficient pressure of glue supply
即使沒有對打膠機的移動速度進行調整也會出現打膠不飽滿的情況，那么也有可能是供膠壓力太小所致。此時只需調整供膠有壓力就能解決問題了。

Even if there is no change in the movement speed of the glue machine will appear to be not full of glue, then it may be too little pressure caused by glue. At this point only need to adjust the glue supply pressure can solve the problem.
三、頭部傳感器損壞

Head sensor damage
雖然很少出現這種情況，但也不排除出現這種情況。打膠機頭有檢測鋁條深度的傳感器，如發現鋁條過深或過淺時他會自動調節輸送的移動速度和供膠壓力(自動調節幅度在小范圍內)。

While this rarely happens, it can not be ruled out. The head of the sealing machine has a sensor to detect the depth of the aluminum strip. If the aluminum strip is too deep or too shallow, it will automatically adjust the moving speed of the conveying and the pressure of the glue supply (within a small range of automatic adjustment) .
上述是昌盛雙組份打膠機為大家介紹的內容，感謝您在百忙中查看我公司的內容，如果您想了解更多，歡迎來電咨詢！

The above is prosperous two-component glue machine for you to introduce the content, thank you for checking my company’s content in the busy schedule, if you want to know more, welcome to inquire!